Studying Macromolecular Interactions of Cellular Machines by the Combined Use of Analytical Ultracentrifugation, Light Scattering, and Fluorescence Spectroscopy Methods.

Cellular machines formed by the interaction and assembly of macromolecules are essential in many processes of the living cell. These assemblies involve homo- and hetero-associations, including protein-protein, protein-DNA, protein-RNA, and protein-polysaccharide associations, most of which are reversible. This chapter describes the use of analytical ultracentrifugation, light scattering, and fluorescence-based methods, well-established biophysical techniques, to characterize interactions leading to the formation of macromolecular complexes and their modulation in response to specific or unspecific factors. We also illustrate, with several examples taken from studies on bacterial processes, the advantages of the combined use of subsets of these techniques as orthogonal analytical methods to analyze protein oligomerization and polymerization, interactions with ligands, hetero-associations involving membrane proteins, and protein-nucleic acid complexes.

Effect of Sample Preprocessing and Size-Based Extraction Methods on the Physical and Molecular Profiles of Extracellular Vesicles.

Extracellular vesicles (EVs) are nanometric lipid vesicles that shuttle cargo between cells. Their analysis could shed light on health and disease conditions, but EVs must first be preserved, extracted, and often preconcentrated. Here we first compare plasma preservation agents, and second, using both plasma and cell supernatant, four EV extraction methods, including (i) ultracentrifugation (UC), (ii) size-exclusion chromatography (SEC), (iii) centrifugal filtration (LoDF), and (iv) accousto-sorting (AcS). We benchmarked them by characterizing the integrity, size distribution, concentration, purity, and expression profiles for nine proteins of EVs, as well as the overall throughput, time-to-result, and cost. We found that the difference between ethylenediaminetetraacetic acid (EDTA) and citrate anticoagulants varies with the extraction method. In our hands, ultracentrifugation produced a high yield of EVs with low contamination; SEC is low-cost, fast, and easy to implement, but the purity of EVs is lower; LoDF and AcS are both compatible with process automation, small volume requirement, and rapid processing times. When using plasma, LoDF was susceptible to clogging and sample contamination, while AcS featured high purity but a lower yield of extraction. Analysis of protein profiles suggests that the extraction methods extract different subpopulations of EVs. Our study highlights the strengths and weaknesses of sample preprocessing methods, and the variability in concentration, purity, and EV expression profiles of the extracted EVs. Preanalytical parameters such as collection or preprocessing protocols must be considered as part of the entire process in order to address EV diversity and their use as clinically actionable indicators.

BASIS: BioAnalysis SEDFIT integrated software for cGMP analysis of SV-AUC data.

Sedimentation velocity analytical ultracentrifugation (SV-AUC) has long been an important method for characterization of antibody therapeutics. Recently, SV-AUC has experienced a wave of new interest and usage from the gene and cell therapy industry, where SV-AUC has proven itself to be the "gold standard" analytical approach for determining capsid loading ratios for adeno-associated virus (AAV) and other viral vectors. While other more common approaches have existed in the realm of cGMP-compliant techniques for years, SV-AUC has long been used strictly for characterization, but not for release testing. This manuscript describes the challenges faced in bringing SV-AUC to a cGMP environment and describes a new program, "BASIS", which allows for 21 CFR Part 11-compliant data handling and data analysis using the well-known and frequently cited SEDFIT analysis software.

Efficient preparation of high-purity and intact mesenchymal stem cell-derived extracellular vesicles.

Mesenchymal stem cell-derived extracellular vesicles (MSC-EVs) have shown great promise for regeneration and immunomodulation. However, efficient and scalable methods for their preparation are still lacking. In this study, we present the adoption of a label-free technique known as "EXODUS" to isolate and purify MSC-EVs from the conditioned medium. Our findings indicate that EXODUS can rapidly isolate EVs from 10 mL of conditioned medium with a 5-fold higher yield compared to conventional approaches, including ultracentrifugation (UC) and polyethylene glycol precipitation (PEG) methods. Additionally, pre-storing the conditioned medium at 4°C for 1 week resulted in a ~2-fold higher yield of MSC-EVs compared to the freshly prepared medium. However, storing the purified EV particles at 4°C for 1 month led to a 2-fold reduction in particle concentration. Furthermore, we found that MSC-EVs isolated using EXODUS exhibit higher expression levels of EV markers such as Alix, Flotillin1, CD81, and TSG101 in comparison to PEG and UC methods. We also discovered that MSC-EVs isolated using EXODUS are enriched in response to cytokine, collagen-containing extracellular matrix, and calcium ion binding compared to PEG method and enriched in extracellular structure organization, extracellular matrix, and extracellular matrix structure constituents compared to UC. Finally, we demonstrated that MSC-EVs isolated using EXODUS exhibit greater potential in animal organ development, tissue development, and anatomical structure morphogenesis compared to the UC. These findings suggest that EXODUS is a suitable method for the large-scale preparation of high-quality MSC-EVs for various clinical applications.

Extracellular-Vesicle Catch-and-Release Isolation System Using a Net-Charge Invertible Curvature-Sensing Peptide.

Extracellular vesicles (EVs) carry various informative components, including signaling proteins, transcriptional regulators, lipids, and nucleic acids. These components are utilized for cell-cell communication between donor and recipient cells. EVs have shown great promise as pharmaceutical-targeting vesicles and have attracted the attention of researchers in the fields of biological and medical science because of their importance as diagnostic and prognostic markers. However, the isolation and purification of EVs from cell-cultured media remain challenging. Ultracentrifugation is the most widely used method, but it requires specialized and expensive equipment. In the present study, we proposed a novel methodology to isolate EVs using a simple and convenient method, i.e., an EV catch-and-release isolation system (EV-CaRiS) using a net-charge invertible curvature-sensing peptide (NIC). Curvature-sensing peptides recognize vesicles by binding to lipid-packing defects on highly curved membranes regardless of the expression levels of biomarkers. NIC was newly designed to reversibly capture and release EVs in a pH-dependent manner. NIC allowed us to achieve reproducible EV isolation from three human cell lines on resin using a batch method and single-particle imaging of EVs containing the ubiquitous exosome markers CD63 and CD81 by total internal reflection fluorescence microscopy (TIRFM). EV-CaRiS was demonstrated as a simple and convenient methodology for EV isolation, and NIC is promising for applications in the single-particle analysis of EVs.

Separation of high-purity plasma extracellular vesicles for investigating proteomic signatures in diabetic retinopathy.

Extracellular vesicles (EVs) play a multifaceted role in intercellular communication and hold significant promise as bio-functional indicators for clinical diagnosis. Although plasma samples represent one of the most critical sources of circulating EVs, the existing technical challenges associated with plasma-EV isolation have restricted their application in disease diagnosis and biomarker discovery. In this study, we introduce a two-step purification method utilizing ultracentrifugation (UC) to isolate crude extracellular vesicle (EV) samples, followed by a phospholipid affinity-based technique for the selective isolation of small EVs, ensuring a high level of purity for downstream proteomic analysis. Our research demonstrates that the UC & TiO2-coated magnetic bead (TiMB) purification system significantly improves the purity of EVs when compared to conventional UC or TiMB along. We further revealed that proteomic alterations in plasma EVs effectively reflect key gene ontology components associated with diabetic retinopathy (DR) pathogenesis, including the VEGF-activated neuropilin pathway, positive regulation of angiogenesis, angiogenesis, cellular response to vascular endothelial growth factor stimulus, and immune response. By employing a comprehensive analytical approach, which incorporates both time-series analysis (cluster analysis) and differential analysis, we have identified three potential protein signatures including LGALS3, MYH10, and CPB2 that closely associated with the retinopathy process. These proteins exhibit promising diagnostic and severity-classification capabilities for DR disease. This adaptable EV isolation system can be regarded as an effective analytical tool for enhancing plasma-based liquid biopsies toward clinical applications.

Methods for the Design and Analysis of Analytical Ultracentrifugation Experiments.

Analytical ultracentrifugation experiments play an integral role in the solution-phase characterization of biological macromolecules and their interactions. This unit discusses the design of sedimentation velocity and sedimentation equilibrium experiments performed with a Beckman Proteomelab XL-A or XL-I analytical ultracentrifuge and with a Beckman Optima AUC. Instrument settings and experimental design considerations are explained, and strategies for the analysis of experimental data with the UltraScan data analysis software package are presented. Special attention is paid to the strengths and weaknesses of the available detectors, and guidance is provided on how to extract maximum information from analytical ultracentrifugation experiments. © 2024 The Authors. Current Protocols published by Wiley Periodicals LLC.

Rapid high-resolution size distribution protocol for adeno-associated virus using high speed SV-AUC.

Simulated SV-AUC data for an adeno-associated virus (AAV) sample consisting of four components having closely spaced sedimentation coefficients were used to develop a high-speed protocol that optimized the size distribution analysis resolution. The resulting high speed (45K rpm) SV-AUC (hs-SV-AUC) protocol poses several experimental challenges: 1) the need for rapid data acquisition, 2) increased potential for optical artifacts from steep and fast moving boundaries and 3) the increased potential for convection. To overcome these challenges the protocol uses interference detection at low temperatures and data that are confined to a limited radial-time window. In addition to providing higher resolution AAV SV-AUC data and very short run times (<20 min after temperature equilibration), the need to match the sample and reference solvent composition and meniscus positions is relaxed making interference detection as simple to employ as absorbance detection. Finally, experimental data comparing hs-SV-AUC (at 45K rpm) with standard low-speed (15K rpm) SV-AUC on the same AAV sample demonstrate the size distribution resolution improvement. These experiments also validate the use of a radial-time window and show how quickly data can be acquired using the hs-SV-AUC protocol.

Applications and Limitations of Equilibrium Density Gradient Analytical Ultracentrifugation for the Quantitative Characterization of Adeno-Associated Virus Vectors.

Adeno-associated virus (AAV) vectors are produced as a mixture of the desired particle (full particle, FP), which is filled with the designed DNA, product-related impurities such as particle without DNA (empty particle, EP), and aggregates. Cesium chloride or iodixanol equilibrium density gradient ultracentrifugation (DGE-UC) has been used for the purification of AAV vectors. DGE-UC can separate FP from impurities based on the difference in their buoyant densities. Here, we report the applications and limitations of equilibrium density gradient analytical ultracentrifugation (DGE-AUC) using a modern AUC instrument that employs DGE-UC principles for the characterization and quantitation of AAV vectors. We evaluated the quantitative ability of DGE-AUC in comparison with sedimentation velocity AUC (SV-AUC) or band sedimentation AUC (BS-AUC) using AAVs with different DNA lengths and different serotypes. DGE-AUC enabled the accurate quantification of the ratio of FP to EP when the AAV vector primarily contains these particles. Furthermore, we developed a new workflow to identify the components of separated peaks in addition to FP and EP. Ultraviolet absorption spectra obtained by multiwavelength detection can also support peak assignment following component identification. DGE-AUC experiments for AAV vectors have limitations with regard to minor components with low absorption at the detected wavelength or those with a density similar to that of major components of AAV vectors. DGE-AUC is the only analytical method that can evaluate particle density heterogeneity; therefore, SV-AUC or BS-AUC and DGE-AUC are complementary methods for reliable assessment of the purity of AAV vectors.

Investigate the efficacy of size exclusion chromatography for the isolation of extracellular vesicles from C. elegans.

Isolation of Extracellular Vesicles (EVs) has been done extensively in the past using ultracentrifugation, a recent shift has been observed towards precipitation, and exosome isolation kits. These methods often co-elute contaminants of similar size and density which makes their detection and downstream applications quite challenging. As well as the EV yield is also compromised in some methodologies due to aggregate formation. In recent reports, size-exclusion chromatography (SEC) is replacing density gradient-based ultracentrifugation as the gold standard of exosome isolation. It outperforms in yield, purity and does not account for any physical damage to the EVs. We have standardized the methodology for an efficient pure yield of homogenous exosomes of size even smaller than 75 nm in Caenorhabditis elegans homogenate. The paper entails the application and optimization of EV isolation by SEC based on previous studies by optimizing bed size and type of sepharose column employed. We propose that this method is economically feasible in comparison with currently available approaches. A comparative study was conducted to investigate the performance of CL-6B in relation to CL-2B and further, this was combined with ultracentrifugation for higher efficacy. The methodology could be introduced in a clinical setting due to its therapeutic potential and scope. The eluted EVs were studied by flow cytometry, nanotracking and characterized for size and morphology.

Using Analytical Quality by Design to improve analytical method development in vaccines quality control: Application to an optimized quantitative high-performance anion-exchange chromatographic method.

Analytical quality by design (AQbD) is an enhanced approach for the development of analytical methods. AQbD has received much industrial interest, being the subject of several recently published draft guidelines. This article demonstrates the application of AQbD to determine the quantity of non-adsorbed polysaccharide polyribosyl ribitol phosphate (PRP) and percentage of depolymerized PRP in a commercial hexavalent liquid vaccine, and establishment of an analytical control strategy (ACS). The quantification method developed is high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection, preceded by ultracentrifugation (sample preparation) for separation of the depolymerized polysaccharide from the native adsorbed polysaccharide. The first step was to develop the analytical target profile (ATP) which defines the purpose of the analytical measurement as well as the development scope. As a second step, risk assessment tools were used for identification and ranking of the critical method variables (CMVs) which have a potential impact on method performance if not controlled. Based on a multivariate Design of Experiments (DoE) approach, a proposed method operational design region (MODR) was determined for seven CMVs. Finally, the ACS was established from the understanding of the analytical method and the robustness study. This article focuses on robust and operational ranges of critical parameters linked to the ultracentrifugation and chromatographic steps for depolymerized polysaccharide content control. The design space proposed for CMVs corresponds to the ranges that ensure a product that complies with the previously established precision criteria (±2% equivalent to ± 10 % around the product criterion, which is 20 % for depolymerized polysaccharide control limit). The following design space was established from the DoE statistical modeling for ultracentrifugation critical parameters: [483,000-520,000] g for speed, [11-19]°C for temperature, [29-34] minutes for duration, and from extemporaneous to 8 min for holding time before supernatant recuperation after the ultracentrifugation. For chromatographic critical parameters, the MODR is [2-6] psi for mobile phase helium pressure, [0-7] days for mobile phase storage time, and [0-3] days for samples storage time in the autosampler at 5 °C. Methods optimized using the AQbD approach provide strong justifications during regulatory filing for the selection of analytical CMVs, and for the ACS to be applied during the lifecycle management of the method.

Validating the NIH LDL-C equation for provincial implementation in Alberta.

BACKGROUND: LDL-C, a cardiovascular disease risk assessment biomarker, is commonly calculated using the Friedewald equation. The NIH equation overcomes several limitations of the Friedewald equation. Consistent with the Canadian Society of Clinical Chemists (CSCC) lipid reporting recommendations, we assessed the NIH LDL-C equation in Alberta prior to its provincial implementation. METHODS: 1-year (01/01/2021-12/31/2021) of lipid results (n = 1,486,584 after data cleaning) were obtained from five analytical instrument groups used across Alberta. Analyses were performed on all data and after separating by age, analytical instrument group, and fasting status. The correlation between Friedewald- and NIH-calculated LDL-C and between Friedewald- and NIH-calculated LDL-C difference and each lipid parameter, was determined. The frequency of unreportable/inaccurate LDL-C results was compared between the two equations. The concordance between the two equations and with non-HDL-C was determined at LDL-C thresholds. Lastly, LDL-C calculated by Friedewald, NIH, and Martin-Hopkins equations was compared to density-gradient ultracentrifugation. RESULTS: Friedewald- and NIH-calculated LDL-C exhibit the strongest correlation when triglycerides ≤ 4.52 mmol/L. The difference between Friedewald- and NIH-calculated LDL-C increases with decreasing LDL-C concentration. The NIH equation yields fewer inaccurate results (0.35 % vs. 22.0 %). The percent agreement between equations was > 96 % at all LDL-C thresholds, suggesting most patients will not require treatment changes. NIH-calculated LDL-C exhibited better agreement with non-HDL-C when triglycerides ≤ 9.04 mmol/L and better correlated with LDL-C measured by ultracentrifugation (r2 = 0.926 vs. 0.775 (Friedewald) and 0.863 (Martin-Hopkins)). Results were consistent across age, analytical instrument group, and fasting status. CONCLUSIONS: Our findings demonstrate the benefits of implementing the NIH equation across Alberta.

Characterization and quantification of adeno-associated virus capsid-loading states by multi-wavelength analytical ultracentrifugation with UltraScan.

Aim: We present multi-wavelength (MW) analytical ultracentrifugation (AUC) methods offering superior accuracy for adeno-associated virus characterization and quantification. Methods: Experimental design guidelines are presented for MW sedimentation velocity and analytical buoyant density equilibrium AUC. Results: Our results were compared with dual-wavelength AUC, transmission electron microscopy and mass photometry. In contrast to dual-wavelength AUC, MW-AUC correctly quantifies adeno-associated virus capsid ratios and identifies contaminants. In contrast to transmission electron microscopy, partially filled capsids can also be detected and quantified. In contrast to mass photometry, first-principle results are obtained. Conclusion: Our study demonstrates the improved information provided by MW-AUC, highlighting the utility of several recently integrated UltraScan programs, and reinforces AUC as the gold-standard analysis for viral vectors.

Exploring the Versatility of Exosomes: A Review on Isolation, Characterization, Detection Methods, and Diverse Applications.

Extracellular vesicles (EVs) are crucial mediators of intercellular communication and can be classified based on their physical properties, biomolecular structure, and origin. Among EVs, exosomes have garnered significant attention due to their potential as therapeutic and diagnostic tools. Exosomes are released via fusion of multivesicular bodies on plasma membranes and can be isolated from various biofluids using methods such as differential ultracentrifugation, immune affinity capture, ultrafiltration, and size exclusion chromatography. Herein, an overview of different techniques for exosome characterization and isolation, as well as the diverse applications of exosome detection, including their potential use in drug delivery and disease diagnosis, is provided. Additionally, we discuss the emerging field of exosome detection by sensors, which offers an up-and-coming avenue for point-of-care diagnostic tools development. Overall, this review aims to provide a exhaustive and up-to-date summary of the current state of exosome research.

Enhancing Extracellular Vesicle Analysis by Integration of Large-Volume Sample Stacking in Capillary Electrophoresis with Asymmetrical Flow Field-Flow Fractionation.

Extracellular vesicles (EVs) play important roles in cell-cell communication and pathological development. Cargo profiling for the EVs present in clinical specimens can provide valuable insights into their functions and help discover effective EV-based markers for diagnostic and therapeutic purposes. However, the highly abundant and complex matrix components pose significant challenges for specific identification of low-abundance EV cargos. Herein, we combine asymmetrical flow field-flow fractionation (AF4) with large-volume sample stacking and capillary electrophoresis (LVSS/CE), to attain EVs with high purity for downstream protein profiling. This hyphenated system first separates the EVs from the contamination of smaller serum proteins by AF4, and second resolves the EVs from the coeluted, nonvesicular matrix components by CE following LVSS. The optimal LVSS condition permits the injection of 10-fold more EVs into CE compared to the nonstacking condition without compromising separation resolution. Collection and downstream analysis of the highly pure EVs after CE separation were demonstrated in the present work. The high EV purity yields a much-improved labeling efficiency when detected by fluorescent antibodies compared to those collected from the one-dimension separation of AF4, and permits the identification of more EV-specific cargos by LC-MS/MS compared to those isolated by ultracentrifugation (UC), the exoEasy Maxi Kit, and AF4. Our results strongly support that AF4-LVSS/CE can improve EV isolation and cargo analysis, opening up new opportunities for understanding EV functions and their applications in the biomedical fields.

Analytical Ultracentrifugation Detects Quaternary Rearrangements and Antibody-Induced Conformational Selection of the SARS-CoV-2 Spike Trimer.

Analytical ultracentrifugation (AUC) analysis shows that the SARS-CoV-2 trimeric Spike (S) protein adopts different quaternary conformations in solution. The relative abundance of the "open" and "close" conformations is temperature-dependent, and samples with different storage temperature history have different open/close distributions. Neutralizing antibodies (NAbs) targeting the S receptor binding domain (RBD) do not alter the conformer populations; by contrast, a NAb targeting a cryptic conformational epitope skews the Spike trimer toward an open conformation. The results highlight AUC, which is typically applied for molecular mass determination of biomolecules as a powerful tool for detecting functionally relevant quaternary protein conformations.

Analytical Ultracentrifugation-Calibrated Anion-Exchange Chromatography for Sensitive and Intact Determination of Osteopontin in Infant Formula and Dairy Products.

Osteopontin is a crucial protein ingredient that has been applied in fortified dairy products and infant formula. It has great significance to infant gut health and brain development. However, current techniques including enzyme-linked immunosorbent assay and liquid chromatography coupled with mass spectrometry are still facing the bottleneck of low sensitivity and indirect quantification. Moreover, the unavailable certified commercial OPN standard hinders its accurate quantification. Herein, a novel method of anion-exchange chromatography was established to determine OPN concentration in several dairy matrices. The polarity-reversed capillary isoelectric focusing was utilized to measure the exact isoelectric point (pI) to support method development for OPN separation. Analytical ultracentrifugation was used to calibrate the purity of intact OPN to develop an in-house reference standard. The method showed the merits of limits of detection to 0.04 mg/100 g, relative standard deviation of reproducibility <5% for 13 out of 14 tested matrices, and an average recovery rate of 101.3%. This method has shown the potential to be adopted as an international standard method for the quantification of intact OPN in infant formula and dairy products.

How to process synovial fluid samples of gouty arthritis and extract its exosomes for subsequent cytokine analysis.

BACKGROUND: The comparative analysis of ultracentrifugation (UC) and polyethylene glycol (PEG)-based precipitation for the isolation of exosomes in gouty arthritis synovial fluid (GASF) is rarely reported, and it is not known whether different isolation methods can influence subsequent cytokine analysis. METHODS: GA patients were enrolled during a 1-year period from May 2021 to May 2022. Morphology, particle number, size, purity, protein concentration, and biomarker proteins of GASF-derived exosomes in both extraction methods were observed using transmission electron microscopy, nanoparticle tracer analysis, bicinchoninic acid assay, and Western blotting. An ELISA-based assay platform was used to detect the cytokines in exosomes using Meso Scale Discovery. RESULTS: Thirty-two cases of fresh GASF were taken and randomly divided between the UC group (n = 16) and the PEG group (n = 16). Transmission electron microscopy images and nanoparticle tracer analysis results showed round vesicles measuring 100 nm on average. The protein expressions of TSG101, CD63, and CD81 in exosomes of the 2 groups were measured via Western blotting. The number and protein concentration of GASF-derived exosome particles from the PEG group were significantly higher than that of the UC group (P < .001). However, in the purity estimation, the UC group reflected significantly higher exosomes extractability (P < .01). Expression of IL-6 and IL-8 in the GASF-derived exosomes were higher in the UC group (P < .05), showing a median of 3.31 (interquartile range, IQR: 0.84-13.16) pg/mL, and a median of 2.87 (IQR: 0.56-13.17) pg/mL, respectively; moreover, IL-1ß was mostly undetectable in the PEG group. CONCLUSION: The UC method was found to yield exosomes of a higher purity, albeit at a lower quantity but with more abundant inflammatory cytokines; whereas the opposite was the case for the PEG group. The chemical precipitation method might not be suitable in terms of extracting GASF-derived exosomes for inflammation and immunity studies.

Effect of temperature and protein concentration on the protein types within the ultracentrifugation supernatant of liquid micellar casein concentrate.

Liquid micellar casein concentrate (MCC) is an ideal milk-based protein ingredient for neutral-pH ready-to-drink beverages. The texture and mouthfeel of liquid MCC-based beverages depend on the beverage protein content, as well as the composition of soluble proteins in the aqueous phase around the casein micelle. The objective of this study was to determine the composition of soluble proteins in the aqueous phase around the casein micelles in skim milk and liquid MCC containing 7.0% and 11.6% protein content. Skim milk was pasteurized and concentrated to 7% protein content by microfiltration and then to 18% protein content by ultrafiltration. The 18% MCC was then serially diluted with distilled water to produce 11.6% and 7.0% protein MCC. Skim milk, 7.0% MCC, and 11.6% MCC representing starting materials with different protein concentrations were each ultracentrifuged at 100,605 × g for 2 h. The ultracentrifugation for each of the starting materials was performed at 3 different temperatures: 4°C, 20°C, and 37°C. The ultracentrifugation supernatants were collected to represent the aqueous phase around the casein micelle in MCC solutions. The supernatants were analyzed by Kjeldahl to determine the crude protein, casein, and casein as a percentage of crude protein content, and by sodium dodecyl sulfate PAGE to determine the composition of the individual proteins. Most of the proteins in MCC supernatant (about 45%) were casein proteolysis products. The remaining proteins in the MCC supernatant consisted of a combination of intact αS-, ß-, and κ-caseins (about 40%) and serum proteins (14-18%). Concentrations of αS-casein and ß-casein in the supernatant increased with decreasing temperature, especially at higher protein concentrations. Temperature and interaction between temperature and protein explained about 80% of the variation in concentration of supernatant αS- and ß-caseins. Concentration of supernatant κ-casein, casein proteolysis products, and serum protein increased with increasing MCC protein concentration, and MCC protein concentration explained most of the variation in supernatant κ-casein, casein proteolysis products, and serum protein concentrations. Predicted MCC apparent viscosity was positively associated with the dissociation of αS- and ß-caseins. Optimal beverage viscosity could be achieved by controlling the dissociation of these proteins in MCC.

Development of tandem cation exchange chromatography for high purity extracellular vesicle isolation: The effect of ligand steric availability.

Purification of extracellular vesicles for research and therapeutic applications requires updated methodology to address the limitations of traditional ultracentrifugation and other size-based separation techniques. Their downfalls include induced extracellular vesicle aggregation, low yields, poor scalability and one-dimensionality of the separation process, as the size or sedimentation speed of extracellular vesicles is often the only selection criterion. Ion exchange chromatography is a promising alternative or supplementary method candidate, as it offers a different approach for extracellular vesicle separation, which is surface charge. For now, mostly anion exchange chromatography has been evaluated for extracellular vesicle purification, as it successfully relies on the strongly negative surface charge of extracellular vesicles. However, as extracellular vesicles are very complex in their structure, also cation exchange chromatography could be applicable, due to individual cationic domains on the extracellular vesicle surface. Here, we compare anion exchange chromatography to different types of cation exchange chromatography for the purification of platelet extracellular vesicle samples also containing plasma-derived impurities. We found that the choice of resin structure used for cation exchange chromatography is critical for binding platelet extracellular vesicles, as a conventional-type cation exchanger was found to only capture and elute less than 20% of extracellular vesicles. With the tentacle-type resin, it was possible to obtain comparable platelet extracellular vesicle yields (over 90%) with cation exchange chromatography compared to anion exchange chromatography, as well as superior purity, especially when it was combined to conventional cation exchange resin.